The safety light curtain is a key equipment to ensure production safety at the automobile production line . It uses infrared beam detection mechanism to prevent personnel from accidentally touching or entering dangerous areas and is widely used in high-risk processes such as stamping, welding, and assembly.

The laser lidar sensor is hoisted on the side of the beam near the flexible leg to monitor obstacles below the beam and ensure that they do not collide with the flexible leg

Install laser scanner / lidar sensor equipment on the crane beam or side position on the truck channel, and conduct three-dimensional observation during the process of picking up and unloading to detect whether the truck driver or worker is in the operating area and obtain accurate position measurement information of the truck.

A beam collision prevention scheme based on laser scanning technology, by setting the area health function of the laser scanner, provides an alarm or emergency stop signal in advance before the ship collides with the beam to prevent danger from occurring

Lidar is installed at the four corners of the crane, and by setting up intrusion detection areas, it achieves collision prevention along the crane's travel route.

LSD-LWH is laser scanning dimension measurement system for the dynamic vehicles on LSD series lidar basis, vehicle length, width and height detection measurement system is undergoing on-site metrology testing. Through testing on different vehicles, trucks and cars

Sensor solutions for overlimt detection of smart parking has been paid more and more attention because of its high efficiency and space saving. Sensors are mainly used in three-dimensional garages for vehicle detection, positioning limit and system control, ensuring the precise operation of vehicle access processes.

Nowadays more and more families have own cars even more than two, the increase volume of vehicles and the number of parking spaces in the parking lot is missing makes automatic three-dimensional parking equipment is popular. Stereo parking system has always been known for its efficiency and safety. So how does it ensure the safety of vehicles and people? This is all thanks to the photoelectric sensor. Photoelectric sensors work on the principle of light refraction, energy-saving and environmentally friendly, and accurate detection. G-TEK Sensor has been in the sensor research and development and production industry for 20 years, independent research and development of photoelectric sensors, safety light curtains and laser radar by the customer's favorite.

Photoelectric sensors detecting the presence or absence of cars on the carrier plates and able to detect the vehicle parking at the ideal location. Proximity sensors are usually used for carrier plate lift in place detection. Stereo garages are equipped with a special loading plate for each parking space and complete the entire process of accessing the vehicle by means of an electrically controlled lifting and traversing drive system. The load board will be parked in front of the designated parking space under the control of the drive system, and then the vehicle will be lifted and transported to the parking space by the mechanical equipment at the bottom. It is important to make sure that the carriers are parked in place. Proximity sensors primarily detect metal objects. They have stable performance, high tolerance of hazardous environments, low maintenance requirements, low cost and high efficiency. It is the device of choice for positioning detection. So let's take a look at how proximity sensors are used in stereo parking.

At present, with the development of science and technology, the parking lot has a complete system and entered the era of intelligent parking. Among them, in the major intelligent parking lot system, the application of various sensors have provided indispensable technical support for intelligent parking. Parking lot photoelectric sensors have stable performance and a wide range of application functions. In addition to the common vehicle detection, safety and security detection can also be used to detect the shape and size of the vehicle to help the system to make the choice of the size of the parking space. If the parking lot's intelligent system is the brain, then the photoelectric sensors that power it are its neurons. When the car in and out, a series of sensor neurons will respond, feedback to the brain of the intelligent system, so that the parking lot instructions and equipment to make the appropriate action. Next, let's see how the photoelectric sensor switch actually realizes the determination of the size of the parking space.

Nowadays more and more families have own cars even more than two, the increase volume of vehicles and the number of parking spaces in the parking lot is missing makes automatic three-dimensional parking equipment is popular. Stereo parking system has always been known for its efficiency and safety. So how does it ensure the safety of vehicles and people? This is all thanks to the photoelectric sensor. Photoelectric sensors work on the principle of light refraction, energy-saving and environmentally friendly, and accurate detection. G-TEK Sensor has been in the sensor research and development and production industry for 20 years, independent research and development of photoelectric sensors, safety light curtains and laser radar by the customer's favorite.

LiDAR realizes the spatial dimension detection of vehicle contour by using Laser sensor to scan the vehicle to be detected into three-dimensional spatial point cloud data, and then processes these three-dimensional spatial cloud data to obtain the vehicle body contour point cloud data; the vehicle point cloud data is then segmented into regions and combined with the size measurement algorithm to obtain the specific body contour value of the vehicle.