Due to the outstanding advantages of the laser sensor and the various video tutorials of the laser sensor on the Internet, people have a high demand and recognition for this kind of laser sensor. So for the majority of users, after purchasing related products from laser sensor manufacturers, what should they pay attention to during the installation process? Now this article will briefly explain the main points of attention in the device.

What to pay attention to when installing the laser sensor:
1. Device boss positioning
The laser sensor‍ requires the positioning of the device boss to ensure the stability in use, so it needs to be compressed with a nut screw or a pressure plate. It is strictly forbidden to process the shaft and the housing when the laser sensor‍ is installed. The purpose of this is to avoid the shaft And the shell is affected by external impact and pressure. In addition, it is strictly forbidden to loosen the screws on the laser sensor‍, it is necessary to rotate the position of the fixing ring.
2. The position of the axis
When installing a high-quality laser sensor, when connecting the output shaft of the sensor with other machinery, ensure that the axis line is in the same straight line. If there is a deviation, you need to use adapters such as universal joints or bellows. Avoid bending and deformation when the laser is located on the output shaft of the sensor, otherwise it may damage other components.
 3. Welding of external wiring
 In the process of using the laser sensor, it is necessary to introduce some external wiring, and the welding of the external wiring is also more exquisite. The external wiring should be welded on the waist groove of the lead-out end, not on the top. In addition, the welding machine and welding oil should be used as little as possible during the welding process, and the welding time should be kept short.
 In summary, the majority of users need to pay more attention to the above aspects when installing high-quality laser sensors. In addition, they should also prevent gas solvents, water droplets and steam from attacking the displacement sensor. At the same time , It is also necessary to prevent metal shavings or other powders from entering the laser sensor to affect the accuracy.