Industrial doors for enterprises commonly used facilities, suitable for large warehouses, logistics industry, pharmaceutical, food, plant and mining enterprises for opening speed, insulation, sound insulation, sealing, wind resistance and other relatively high requirements of the industry. Especially the doorway is larger, inconvenient to install the ground door body to play a convenient, fast opening role.

Industrial doors are mainly divided into: industrial rolling doors, industrial sliding doors, industrial sliding doors, manual/electric sliding doors, fast rolling doors and other types. The industrial sliding door is divided into vertical lifting, standard lifting and high lifting, while the electric sliding door is divided into the middle to the two sides of the lateral switch or one-way switch two. Which industrial door opening method will depend on the analysis of your work site-specific and development requirements, and each industrial door design has unique characteristics and superiority. Larger doors include hangar stacking doors, folding doors and other types. The following is an introduction to the characteristics of the three most common industrial doors: industrial rolling doors, industrial fast doors and industrial lift doors.

Industrial sliding door

The industrial sliding door has the advantages of heat insulation, sound insulation, heat preservation, etc. It is practical for large warehouses and factory doors. The top, bottom and both sides of the door are equipped with high-quality rubber sealing strips, and there is also a reliable seal between the door panels to ensure that the door body is not eroded and the sealing strips are installed all around, with excellent air tightness. Lift door opens vertically upward, hanging flat on the inside of the wall above the doorway, does not occupy any space indoors; gives full play to the advantages of vertical rise, does not occupy both sides of the doorway, and releases the doorway space to the maximum extent. The maximum production width of an industrial sliding door panel can reach 10 meters. The industrial sliding door is equipped with safety protection devices, such as infrared safety sensors, anti-fall devices, and airbags (optional). To prevent the door body from falling or the door bottom and obstacles from touching, the door then automatically stops or reverse operation to avoid accidents. Infrared safety guards commonly used in industrial sliding doors include PF50R-AR laser reflector type photoelectric sensor, LSE area detection type measuring light curtain, PF50T photoelectric sensor, and PM18T through beam photoelectric sensor.

Industrial rolling shutter door

The industrial rolling shutter door is connected with multi-joint movable door pieces in series, fixed in the rail chute, and rotates up and down with the scroll shaft above the door as the center. With a special motor to drive the central axis of the rolling shutter rotation, to reach the rolling shutter switch, when the rotation to the motor set the upper and lower limits automatically stop. Industrial rolling shutter door is characterized by strong durability, anti-aging, corrosion resistance, no fading, and easy maintenance. Mainly suitable for medium and high-grade plant external use doors. Industrial sliding door commonly used infrared safety protection devices include PF50R-AR laser reflector type photoelectric sensor, PT12T through beam miniature photoelectric sensor, PF50T photoelectric sensor, and PM18T through beam photoelectric sensor.

Industrial fast door

An industrial fast door is a curtain panel structure composed of a number of cloth curtains through high temperature, the main function is heat preservation, moisture preservation, dustproof, insect prevention, sound insulation, etc., so that the workshop to maintain a constant temperature, constant humidity, clean working environment. It is suitable for food, medicine, electronics, rubber, chemical, automobile, textile, logistics and other fields. Industrial fast door opening can be divided into a push button switch and an automatic induction switch, automatic induction switch by the door opening sensor provides a trigger signal to the control system, and the control system according to the current position of the fast-rolling door sends instructions to the inverter, start the drive motor to make the door curtain rise quickly, the vehicle-pedestrian through the door curtain automatically down, close the channel until the next open signal to open again. Fast-rolling door lifting speed is very fast, can not be like the steel rolling door directly starts to stop, and generally need a frequency converter to control the speed of the motor. Up the faster the better, fast in place when you need to have a deceleration buffer stop process to prevent impact on the track, to prevent pinching, to reduce noise, which is also a measure of the performance of the fast-rolling door a standard. Infrared safety guards commonly used in industrial sliding doors include PF50R-AR laser reflector type photoelectric sensor, PF50R reflector type photoelectric sensor, PT12T opposite type miniature photoelectric sensor, PMF80R reflector type photoelectric sensor, LSE area detection type measuring light curtain.