Search HistoryClear all records
- 全部
- 产品管理
- 新闻资讯
- 介绍内容
- 企业网点
- 常见问题
- 企业视频
- 企业图册
Color sensor
CF50 series
Key words:
CF50 series
Related downloads :
- Description
- Specs
- Model
-
- Commodity name: CF50 series
- Commodity ID: CF50
- Category: Color sensor
- Model No.: CF50
CF50 series color sensor got RGB light source and the light spot is line type. Suitable for applications that require high-precision color recognition, such as multi-color printing systems, complex color detection, etc. Due to its ability to measure and compare color values on object surfaces, it is suitable for the place that require high-precision color control.
CF50 series color sensor got RGB light source and the light spot is line type. This color mark sensors is suitable for applications that require high-precision color recognition, such as multi-color printing systems, complex color detection, etc. Due to its ability to measure and compare color values on object surfaces, it is suitable for the place that require high-precision color control. Welcome to inquiry Tianjin G-TEK color mark sensor manufacturer.
-
● Line type spot 1.5*7mm for various detection environment
● Long range sensing distance 18~28mm
● High vibration resistance performance by adjusting the accuracy to eliminate the influence of vibration
● Accurate recognition when detecting object edges or adjacent position of two different colors
● Equipped with two detection modes of color mark mode and color detection mode
● Two point setting, simple and convenient, compact size, suitable for installation in different spaces
General Parameters
Product Parameters Model CF50-18MM-NF CF50-18MM-PF Switching output NPN PNP Detection mode RGB Light source Red LED, green LED, blue LED Light Wave length Red(665nm), green(525nm), blue(470nm) Sensing distance 18~28mm Input Switch Mode Color mark mode Low(ON) 0~0.6VDC Current outflow ＜0.5mA, Impedance around 10kΩ Low( OFF)
0~0.6VDC or openColor mode High(OFF)12~24VDC or open High(ON)
12~24VDC Current outflow ＜3mA,
Impedance around 10kΩElectrical Parameters Supply voltage 12~24VDC,floating ratio(P-P):10% max. Current consumption Power less than 850mW（supply voltage24V,Consumes current ＜35mA） Response time 100μs Output Control Mark mode When sensing color mark-ON Color mode When color consistent-ON Output type NPN Open collector transistor 24V, Inflow current up to 50mA,
Applied voltage less than 30VDC (between output and 0V),
Residual voltage 1.5v or less
(when inflow current up to 50mA).NPN Open collector transistor 24V,
Inflow current up to 50mA,
Applied voltage less than 30VDC(between output and +V),
Residual voltage 1.5v or less
(when inflow current up to 50mA).Circuit protection Reverse polarity protection,overcurrent protection and overvoltage protection Output selection Match output: Connected when target color matches the memory color;
Mismatch output: Connected when target color different from the recorded color.Mechanical Parameters Dimension 32mm×50mm×21mm Housing material PBT Cable diameter Φ4.5mm Wire cross section 0.2mm²×4 core Wire length 2m Environmental Parameters Ambient illuminance Sun light ≤10000 Lux; Incandescent lamp irradiation≤5000 Lux Ambient temperature -10~55 ℃（no freezing; no condensation） Vibration resistance 500m/s², 3 times each in the X,Y,and Z directions -
Product Wiring Type Output Type Product Model Color Sensor Direct outlet NPN CF50-18MM-NF PNP CF50-18MM-PF
Previous Page
Next Page
Previous Page
Next Page
Related Product
Consult Now
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Contact Information
Add: No.6 Guangyuan Road , Zhajiawo Town Xiqing Dist ,Tianjin, China
Tel: +86-13682005660
E-mail: export@gtekautomation.com