Search HistoryClear all records
- 全部
- 产品管理
- 新闻资讯
- 介绍内容
- 企业网点
- 常见问题
- 企业视频
- 企业图册
Color sensor
CF70 series
Key words:
CF70 series
Related downloads :
- Description
- Specs
- Model
-
- Commodity name: CF70 series
- Commodity ID: CF70
- Category: Color sensor
- Model No.: CF70
CF70 series color sensor has micro color difference recognition function, capable of detecting subtle colors. It's designed with 8 channel and able to detect 4 types of storage at the same time. It is consisted of an amplifier and detection heads.
CF70 series color mark sensors has micro color difference recognition function, capable of detecting subtle colors. It's designed with 8 channel and able to detect 4 types of storage at the same time. It is consisted of an amplifier and detection heads.
-
● Micro color difference recognition function, capable of detecting subtle colors
● 8 channel design, capable of simultaneously detecting 4 types of storage
● Accurately identify over 3000 colors
● Suitable for detecting non luminous objects
● Supports triple 16 bit calculation with RGB (red, green, blue) color light source for precise target recognition. The sensor combines three independent color LEDs. Various color signals are converted into 16 bit data in the receiver for color recognition, ensuring the accuracy of detection.General Parameters
Product Parameters Model CF70-N CF70-P Switching output NPN PNP Detection mode RGB Light source Red LED, Green LED, Blue LED Light wave length Red(665nm), Green(520nm), Blue(465nm) Electrical Parameters Supply voltage 12~24VDC,floating ratio(P-P):10% max. Current consumption Basic model: 1.5W(62.5mA max.), Eco model: 1W(42.0ma max.) Timer function Timer OFF/OFF-delay/ON-delay/One-shot,Timer time: 1 to 1,000 ms adjustable (for each bank respectively) Response time 200μS(HSP)/1ms(FINE)/4ms(TURBO)/8ms(SUPER) External calibration input Input time: 20 ms min. Current consumption 75mA Timer function Timer OFF/OFF-delay/ON-delay/One-shot Response time 200μs(HSP)/1ms(FINE) External calibration input Input time: 20 ms min. External switching input (C/C+I mode)
External offset input (Superl mode)Input time: 20 ms min. Control output NPN (PNP) open-collector x 4 channels, 40 VDC (30 VDC) max., Up to 100 mA for one output, Up to 200 mA in total of 4 outputs, Residual voltage: 1.0 V max. Circuit protection Reverse polarity protection,overcurrent protection and overvoltage protection Output selection Match output: Connected when the color of the target matches the memory color;
Mismatch output: Connected when the color of the target is different from the recorded color.Mechanical Parameters Dimension (W x H x L) 38mm×70mm×22.5mm Housing material PC Cable outside diameter Φ4.5mm Wire cross section 0.25mm²×8 Wire length 2m Environmental Parameters Ambient illuminance Sun light ≤20000 Lux; Incandescent lamp irradiation≤10000 Lux Ambient temperature When working:-10℃~＋55℃,no freezing; no condensation; Vibration resistance 10 to 55 Hz, 1.5 mm amplitude in X, Y, and Z directions, 2 hours respectively Technical Parameter: sensing heads
Model CFT-C35 CFT-C37 Type Large spot long distance Luster-cancel, small beam spot Sensing Distance 28~52mm 11~20mm Smallest Spot Diameter 4.5mm when 40mm distance 1mm when 16mm distance Minimum Bend Radius Of Fiber 25mm 15mm Protection Rate IP40 Ambient Illuminance Sun light ≤20000 Lux; Incandescent lamp irradiation≤10000 Lux Ambient Temperature -10℃~＋55℃,no freezing Vibration Resistance 10 to 55 Hz, 1.5 mm amplitude in X, Y, and Z directions, 2 hours respectively Protection Rate IP40 Housing Material Casing PC Lens cap Polyarylic acid esters PC(part 304 stainless) Weight (including 2m cable) 40g 45g -
Product Wiring Type Output Type Product Model Amplifier Direct outlet NPN CF70-N PNP CF70-P Sensor head - CFT-C35 - CFT-C37
Previous Page
Next Page
Previous Page
Next Page
Related Product
Consult Now
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Contact Information
Add: No.6 Guangyuan Road , Zhajiawo Town Xiqing Dist ,Tianjin, China
Tel: +86-13682005660
E-mail: export@gtekautomation.com